The contents - Ford Focus
Introduction
-
2. Engines
2.1. Basic elements of a design of the engine
2.2. Options of Ford Focus engines
2.3. Engine dismantling
2.4. Installation of the power unit
2.5. Assembly and engine dismantling
2.6. Main checks of details and engine knots
2.7. Compression measurement
3. System of greasing of the engine
4. Cooling system
5. Power supply system
6. Management of the power unit and the fulfilled gases
7. Ignition system
8. Coupling
9. Transmission
10. Drive of forward wheels
11. Forward suspension bracket
12. Back suspension bracket
13. Steering
14. Brake system
15. Electric equipment
16. System of production of the fulfilled gases
17. Wheels and tires
Appendix
Schemes of electric connections
Ford Focus
>>
Engines
2.1. Basic elements of a design of the engine
2.1.1. Provorachivaniye of the engine
2.2. Options of Ford Focus engines
2.2.1. Zetec-SE engine
2.2.2. Zetec-E — big effect without a considerable difference in details
The Zetec-E engine — that you should know
Base complete set of the Zetec-E engine
2.2.3. The engine 2000 of modeling year — Endura-DI, capacity of 55 kW (75 h.p.) and 66 kW (90 h.p.)
The turbodiesel Endura engine — that you should know
2.3. Engine dismantling
2.3.1. Zetec-SE 1,4 engine removal – 1,6 l with a transmission
2.3.2. Removal of the Zetec-E engine in 1.8 working volume of 2,0 l, iB5 aggregated with a transmission
2.3.3. Endura-DI engine removal with transmission MTH-75
2.4. Installation of the power unit
2.4.1. Zetec-SE 1,4 engine installation — 1,6 l with a transmission
2.4.2. Zetec-E 1,8 engine installation — 2,0 l with a transmission
2.4.3. Installation of the Endura-DI engine of 1,8 l with a transmission
2.5. Assembly and engine dismantling
2.5.1. Zetec-SE 1,4 engine dismantling – 1,6 l
Engine assembly
2.5.2. Digatel Zetec-E 1,8 – 2,0 l
2.5.3. Endura-DI engine of 1,8 l
2.6. Main checks of details and engine knots
Axial gap of a cranked shaft
Radial gap between loose leaves of radical bearings and necks of a cranked shaft
Measurement of diameter of necks of a cranked shaft
Axial gap of a camshaft
Radial gap of a camshaft
Measurement of diameter of necks of a camshaft
Measurement of internal diameter of the cylinder
Check and measurement of pistons
Check of a condition of a head of the block
2.7. Compression measurement
Norms of a compression of engines