Ford Focus>> Wheels and tires>> Replacement of wheels



Replacement of wheels carry out in the following sequence:
- lift the lever of the parking brake, include the 1st transfer or a backing. On the general road include an emergency signal and put an emergency triangle;
- fix the car against possible congress for what enclose under wheels on the other hand a support or a stone;
- remove a decorative wheel cap. For this purpose insert a screw-driver between a cap and a disk and remove it;
- weaken the moment of an inhaling of the all 4th bolts of fastening of a wheel (on one turn);
- lift the car, put a jack in the place intended only for it on the car bottom;
- unscrew wheel bolts;
- will remove a wheel and establish the spare;
- wrap by hand wheel bolts cross-wise;
- lower the car, tighten bolts the moment of not exceeding 85 N · m;
- establish a decorative cap, will correctly expose the chamber gate;
- check the moment of an inhaling of wheel bolts after 10 km of run;
- the maximum speed with an emergency wheel of 80 km/h.