Ford Focus>> System of production of the fulfilled gases>> Replacement of system of production of the fulfilled gases>> Removal
Removal carry out in the following sequence:
- establish the car on the lift or steadily fix on supports;
- remove the forward heat-shielding screen;
- unscrew nuts of fastening of catalytic converter;
- remove a back arm;
- lower the car;

Fig. 319. Pipeline removal (engine 1.8/2.0)



- remove the pipeline (fig. 319) ;
- remove the heat-shielding screen from a final collector;

Fig. 320. Removal of the contact socket from the sensor lambda probe (engine 1.8/2.0)



- remove the contact socket from the sensor a lambda probe (fig. 320) ;
- remove the sensor a lambda probe;
- lift the car and steadily fix on racks;
- remove catalytic converter, for this purpose dismantle a forward holding arm and remove laying.

Prevention
During dismantle of a holding arm you should prop up the catalyst (fig. 321) .

Fig. 321. Removal of catalytic converter (engine 1.8/2.0)