Ford Focus>> Electric equipment>> Electric motor of a screen wiper of back glass
Removal and installation of the electric motor carry out in the following sequence:
- switch off a screen wiper. Remove a "weight" wire from the negative plug of the storage battery. Remove the brush lever as it is described earlier;
- unscrew a nut of fastening of a power shaft. Pay attention to the provision of details;
- open a back door and remove the internal facing fastening by 2 bolts and 10 clips. By means of a flat screw-driver carefully lift clips from seats;

Fig. 311. Removal of the electric motor of a screen wiper of back glass: 1 — the contact socket; 2 — a wire of connection with "weight"

- disconnect the contact socket 1 (fig. 311) from the electric motor;
- remove a wire of the 2nd connection with "weight";
- unscrew 3 bolts of fastening and remove the electric motor together with an assembly plate;
- remove the electric motor from an assembly plate;
- installation finish in sequence, return to removal. Before the beginning of installation be convinced that the electric motor is in the situation "stop". Bolts of fastening wrap the moment of 20 N · m;
- make a trial trip, if necessary change position of the lever of a screen wiper.