Ford Focus>> Electric equipment>> Belt of a drive of auxiliary units>> Replacement of a natyazhitel of a belt of a drive of auxiliary units
Replacement of a natyazhitel of a belt carry out in the following order.
Cars with the petrol engine
- remove a drive belt as it was described earlier;
- unscrew nuts of fastening of a natyazhitel;
- remove a natyazhitel;
- establish a new natyazhitel;
- tighten nuts of fastening the moment of 25 N · m;

Fig. 308. Removal of a tension roller of the petrol engine



- finish installation in sequence, return to removal (fig. 308) .
Cars with the diesel engine
Remove a drive belt as it was described earlier;
- remove the pump of the hydraulic booster of a steering;
- remove feeding tank of the amplifier of a steering and take aside, watch, that liquid did not follow;

Fig. 309. Removal of a tension roller of the diesel engine



- unscrew nuts of fastening of a natyazhitel (fig. 309) ;
- remove a natyazhitel;
- establish a new natyazhitel and tighten nuts the moment of 48 N · m;
- finish installation in sequence, return to removal.