Ford Focus>> Electric equipment>> Generator>> Generator removal
Removal of a starter carry out in the following order.
Cars with engines 1,4 — 1,6 l
Disconnect a "weight" wire from the negative plug of the storage battery;
- remove a belt of a drive of auxiliary units as it is described earlier;
- remove a protective cover from a generator wire;
- separate the contact socket and remove a wire;
- unscrew from below fastening bolts;
- unscrew from above bolts of fastening and a nut;
- remove the generator;
- installation of the generator carry out to sequences, return to removal;
- bolts and a nut wrap the moment of 45 N · m;
- tighten wire fastening by the moment of 8 N · m.
Cars with engines 1,8 — 2,0 l
Disconnect a "weight" wire from the negative plug of the storage battery;
- remove a belt of a drive of auxiliary units as it is described earlier;
- remove a protective cover from a generator wire;
- separate the contact socket and remove a wire;
- unscrew a bolt of fastening of a broad tank;
- remove a broad tank from a clamp and take aside but so that liquid did not follow;
- remove a tank of the hydraulic booster of a steering and take aside so that liquid did not follow;
- disconnect the contact socket from the engine;
- unscrew bolts of fastening of the generator and remove it;
- installation of the generator carry out to sequences, return to removal;
- wrap bolts of fastening of the generator the moment of 25 N · m;
- tighten a nut of fastening of a wire the moment of 8 N · m.
Cars with diesel engines
Disconnect a "weight" wire from the negative plug of the storage battery;
- remove a belt of a drive of auxiliary units as it is described earlier;
- uncover under the engine;
- remove a protective cover from a generator wire;
- unscrew a nut of fastening of a wire and remove it.
The car with the conditioner
Remove the compressor of the conditioner and take aside;

Fig. 303. Fastening of an arm of a pulley of the generator



- unscrew bolts of an arm of a pulley of the generator (fig. 303) ;

Fig. 304. Removal of an adapter of the generator



- remove a generator adapter, having weakened 3 bolts (fig. 304) ;

Fig. 305. Generator removal



- unscrew bolts of fastening of the generator and remove its (fig. 305) ;
- installation of the generator carry out to sequences, return to removal;
- wrap bolts of fastening of the generator the moment of 25 N · m and an adapter — 12 N · m.