|
The contents - Ford Focus
Introduction 2. Engines 3. System of greasing of the engine 4. Cooling system 5. Power supply system 6. Management of the power unit and the fulfilled gases 7. Ignition system 8. Coupling 9. Transmission 10. Drive of forward wheels 11. Forward suspension bracket 12. Back suspension bracket 13. Steering - 14. Brake system 14.1. Check of level of brake liquid 14.2. Check of a condition of brake system 14.3. Check of the vacuum amplifier of brakes 14.4. Check of operability of brakes 14.5. Air removal from brake system 14.6. Replacement of brake liquid 14.7. Replacement of a feeding tank from the main brake cylinder 14.8. Main brake cylinder 14.9. Vacuum amplifier of brakes 14.10. Removal of a brake hose 14.11. Replacement of brake slips 14.12. Removal and installation of brake disks 14.13. Brake bracket and pistons of brake cylinders 14.14. Nave of a back wheel - 14.15. Parking brake 14.15.1. Replacement of a drive of the parking brake 14.15.2. Adjustment of the parking brake 15. Electric equipment 16. System of production of the fulfilled gases 17. Wheels and tires Appendix Schemes of electric connections 
|
Ford Focus>> Brake system>> Parking brake>> Replacement of a drive of the parking brake Removal carry out in the following sequence:
- lift the car and steadily fix on supports. Will remove wheels;
- lower the lever of the parking brake;
- remove the average console;
- weaken a cable tension, for this purpose remove a clip 1
(fig. 295)
and unscrew a nut 2;
- prop up an exhaust pipe by means of a support and release a pendant support;
cнимите central pendant support;
- remove the heat-shielding screen;
- remove a cable of the parking brake from the jack, for this purpose a cable squeeze out from directing and turn on 90 °;
- release a cable with a cover from directing
(fig. 296)
;
- remove clips from a cable and directing;
- remove a cable, for this purpose the lever 1
(fig. 297)
of the hand brake pull back, remove a cable 2, remove a clip 3 of directing, remove a cable 4 with a cover.
Installation carry out in the following sequence;
- establish all details in sequence, return to removal;
- adjust the parking brake;
- make a trial trip at which carefully pull a manual cable and watch uniformity of braking of both back wheels.
|
|