Ford Focus>> Brake system>> Vacuum amplifier of brakes>> Removal
Removal carry out in the following sequence:
- remove the main cylinder as it was described earlier. The feeding tank can remain;
- on models with ESP system remove the contact socket from the electromagnetic valve;
- remove the contact socket from the block of hydraulic management (HCU);
- remove the brake pipeline and the hydraulic control unit (HCU). To avoid loss of brake liquid or pollution, close the free ends of the pipeline rubber jams;
- remove the hydraulic HCU control unit;
- disconnect a rod of the amplifier of a pedal of a brake;

Fig. 286. Fastening of the vacuum amplifier

- unscrew bolts of fastening of the amplifier and remove his (fig. 286) .