The contents - Ford Focus
- Introduction
   1.1. HOW TO USE THIS REPAIR MANUAL
    1.2. WORKPLACE
    1.3. Recommendations about workshop visit
   1.4. Safety — the main thing at repair
    1.5. Tool
   - 1.6. Councils of professionals at work with carving connection
      1.6.1. Work with rusty carving connections
      1.6.2. Otvorachivaniye of the damaged nuts
      1.6.3. Otvorachivaniye of bolts with an internal shestigrannik and an internal gear wreath
      1.6.4. Otvorachivaniye of screws with direct and crosswise shlitsa
      1.6.5. Drilling of bolts
      1.6.6. Removal and installation of hairpins
      1.6.7. Rassverlivaniye of the broken carving
      1.6.8. Carving cutting
      1.6.9. Sizes of a carving and torques
    1.7. Car lifting by means of a jack
    1.8. Periodic service and care of the car
    1.9. Model range of Ford Focus cars
    1.10. Choice of additional options
   1.11. Chassis
   1.12. Identification on models
 2. Engines
 3. System of greasing of the engine
 4. Cooling system
 5. Power supply system
 6. Management of the power unit and the fulfilled gases
 7. Ignition system
 8. Coupling
 9. Transmission
 10. Drive of forward wheels
 11. Forward suspension bracket
 12. Back suspension bracket
 13. Steering
 14. Brake system
 15. Electric equipment
 16. System of production of the fulfilled gases
 17. Wheels and tires
 Appendix
 Schemes of electric connections


95b376b3


Ford Focus>> Introduction>> Councils of professionals at work with carving connection>> Sizes of a carving and torques
The bolt and nuts should be turned a necessary torque. Wrap bolts and nuts by means of a dinamometrichesky key. For the most common carving connections the following torques operate:
Diameter of a bolt, mm                                              6 8 10 12 14
 Torque, N · m                     10 25 49              85 135