Ford Focus>> Back suspension bracket>> Longitudinal lever>> Lever installation
Installation of the lever carry out in the following sequence:
- establish the longitudinal lever and tighten forward bolts the moment of 115 N · m, bolts of fastening of the cross-section lever tighten also the moment of 115 N · m;
- establish the back bottom lever as it was described above;
- establish the shock-absorber below and fix the bottom forward cross-section lever bolts, having tightened them the moment of 115 N · m;
- establish a spring as it was described earlier;
- fix a cable of the hand brake on the lever;
- establish a brake hose;
- check efficiency of brakes. Probably, air removal from brake system is required;
- measure car height as it did earlier. If the difference with initial size makes more than 5 mm, address on the service center Ford.