Ford Focus>> Back suspension bracket>> Longitudinal lever>> Lever removal
Before the beginning of work measure car height between a bend of a wing and the earth. Remember this size and recheck it after the completion of work. If the difference which cannot be corrected independently turns out, address on the service center Ford.
Removal of the lever carry out in the following sequence:
cнимите a heat-shielding as it is described earlier;

Fig. 261. Removal of a brake hose: 1 — a grip; 2 — hose fastening; 3 — an arm

cнимите a brake hose also fix it by means of a grip 1 (fig. 261) . Thus, you will avoid possible procedure on air removal from brake system;
cнимите brake hose. For this purpose unscrew fastening 2 and take out a hose from an arm 33;
- take out a cable of the hand brake from the lever as it was described earlier;
- unscrew bolts of fastening of the shock-absorber and the forward bottom cross-section lever;
- remove the back bottom cross-section lever;
- we remove the top cross-section lever;

Fig. 262. Removal of the longitudinal lever

- unscrew forward bolts (fig. 262) of fastening of the lever and remove it.