Ford Focus>> Back suspension bracket>> Stabilizer of cross-section stability>> Installation of the stabilizer of cross-section stability

Fig. 260. Adjusting ledge of the plug



Plugs are put on the stabilizer without greasing. To facilitate their installation, moisten plugs with solution for ware washing. At installation of plugs focus them so that ledges (shooter) (fig. 260) were on the left side.
Installation carry out to sequences, return to removal:
- bolts of tightening brackets wrap the moment of 48 N · m (top) and 18 N · m (bottom);
- bolts of the cross-section lever wrap the moment of 15 N · m;
- establish the car on wheels;
- press several times the car then measure car height to the earth from both parties. If the difference makes more than 5 mm, address on the service center Ford for adjustment.