Ford Focus>> Back suspension bracket>> Top cross-section lever>> Removal of the cross-section lever
Before the beginning of work measure car height between a bend of a wing and the earth. Remember this size and recheck it after the completion of work. If the difference which cannot be corrected independently turns out, address on the service center Ford.
Removal of the cross-section lever carry out in the following sequence:
- remove a back wheel;
- unscrew an external bolt of fastening of the cross-section lever;
- remember position of the lever for the subsequent installation;

Fig. 258. Lever removal with a mark of its situation

- unscrew an internal bolt (fig. 258) and remove the lever from a seat.