Ford Focus>> Back suspension bracket>> Cross-section lever bottom (back)>> Removal of the cross-section lever
Before you will begin this work, measure car height between a bend of a wing and the earth. Remember this size and recheck after the completion of work. If the difference which cannot be corrected independently turns out, address on the service center Ford.
Removal carry out in the following sequence:
- remove a back wheel;

Fig. 256. Removal of the stabilizer of cross-section stability



- unscrew a nut of fastening of a rack of the stabilizer of cross-section stability to the lever (fig. 256) ;
- the cross-section lever from below prop up a mobile jack;
- unscrew external bolts, internal while leave on a place;
- unload a jack and take out a spring;

Fig. 257. Removal of the cross-section lever



- take out internal bolts and remove the cross-section lever (fig. 257) .