Ford Focus>> Introduction>> Councils of professionals at work with carving connection>> Otvorachivaniye of screws with direct and crosswise shlitsa
After time bolts can "become attached", so excessive demands will be made to a normal screw-driver. The crosswise screw-driver will approach hardly as will start to jump out from шлицов and after several attempts the head collapses also the screw practically not to turn off.
Try the "become attached" screw to release in faltering blows of a hammer. If the screw head is inaccessible to a hammer, put a suitable screw-driver with the handle protected from a proskalzyvaniye and try to unscrew the screw in blows on the screw-driver handle.
Often happens to eliminate enough the corrosion which has accumulated on a screw head then the screw turns away in the usual way.
If thus the screw did not manage to be turned on, try it to make by means of a shock screw-driver and a suitable head. The shock screw-driver will transform each blow of a hammer to a rotary motion of the screw to which practically any screw cannot resist.