Ford Focus>> Transmission>> Installation of the mechanism of management of a transmission of iB5
If in your transmission inclusion of transfers occurs not accurately or to jamming, not transmission but only the mechanism of management and you can independently eliminate a cause of defect can be the reason of it. The transmission of the Focus car joins by means of two steel cables: cable of gear shifting of white color, cable of a choice of transfers of black color. To remove cables from an arm on a transmission, turn clamps counter-clockwise. Cables are replaced only together.
For installation of the mechanism of management by a transmission of iB5 the following is necessary:
- establish the gear shifting lever in neutral situation;
- remove the plastic panel of the lever of switching;

Fig. 223. Drill installation

- insert a drill in diameter of 3 mm into an opening of the basis of the lever (fig. 223) ;
- lift the car on the lift or reliably fix on support;

Fig. 224. Removal of a cover of the mechanism of gear shifting

- under the car uncover the switching mechanism (fig. 224) ;

Fig. 225. Adjustment of a cable of a choice of transfers

- adjust a cable 1 (fig. 225) of a choice of transfers, for this purpose press a color clamp and transfer the lever 2 to average situation;

Fig. 226. Cable fixing

- move the lever towards inclusion of the 3rd and 4th transfers and release. Fix a cable, having wrung out a color clamp (fig. 226) ;
- establish a cover of the mechanism of gear shifting;
- lower the car;
- take out a drill and establish a plastic cover of the lever of gear shifting.