Ford Focus>> Transmission
|
Type
|
Mechanical, three-running, dvukhvalny, five-step, with route management
|
|
Transmission model
|
iB5
|
MTX-75 (the petrol engine)
|
MTX-75 (the diesel engine)
|
|
Transfer numbers
1st transfer
2nd transfer
3rd transfer
4th transfer
5th transfer
backing
Main transfer
|
3,58
1,93
1,28
0,95
0,76
3,62
4,06*/3,16 **
|
3,42
2,14
1,45
1,03
0,77
3,46
4,06
|
3,67
2,05
1,25
0,87
0,67
3,56
3,41*/3,56 **
|
* Since November, 1999; ** Till November of 1999 g
|
iB5
|
MTX-75 (the petrol engine)
|
MTX-75 (the diesel engine)
|
Automatic transmission
|
|
Volume of filled-in oil, l
|
2,3
|
1,9
|
1,9
|
4,5
|
|
Oil brand
|
WSD-M2C200-C
|
ESD-M2C186-A
|
WSD-M2C200-C
|
WSS-M2C202-B
|
|
|
Fig. 221. iB5 transmission: 1 — the working cylinder of coupling; 2 — сапун; 3 — primary shaft; 4 — a secondary shaft; 5 — differential
|
Depending on options of engines established on Focus cars also various options of transmissions respectively are established. The transmission of iB5 is established with engines of 1,4 l of Zetec-SE, 1,6 l of Zetec-SE and 1,8 l of Zetec-E
(fig. 221)
. With the engine of 2,0 l of Zetec-E and both diesel engines transmission MTH-75 is established.
|
|
Fig. 222. Automatic transmission 4F27E: 1 — a tape brake; 2 — the planetary mechanism; 3, 4, 12 and 13 — multidisk friction clutches; 5 — the oil pump; 6 — the hydrotransformer; 7 — an entrance shaft; 8 — an intermediate gear wheel; 9 — differential; 10 — a gear wheel; 11 — the coupling of a free wheeling
|
The automatic transmission with designation 4F27E is established to Ford with the engine of 1,6 l of Zetec-SE. The Mazda firm took part in development of this box. The transmission has electronic control and function of blocking of the hydrotransformer. Two planetary rows available in a transmission create various options of the transfer relations
(fig. 222)
. Service life of modern transmissions corresponds to car service life. Repair of transmissions needs the special tool therefore we recommend to carry out their repair in specialized workshops. The description of adjusting works, and also works on removal and installation of different options of transmissions is provided in this section.
|
|
|
