Ford Focus>> Coupling>> Car movement with constantly included coupling
If coupling of your car ceased to work as a result of leakage of working liquid from a hydraulic actuator, to the next workshop it is possible to reach without using a coupling pedal.
For this purpose use the following councils;
- prior to the beginning of movement include the 1st transfer and start up the engine a starter, your car will start to move on the 1st transfer. If you do not want to switch transfer to movement time, can repeat all this, having begun movement with the 2nd transfer;
- if you switch transfers under way, inclusion of the 2nd transfer carry out, when turns of a cranked shaft become slightly more than 1000 mines-1. For this purpose gradually reduce pressing an accelerator pedal, deduce the gear shifting lever in neutral situation and try to include the 2nd transfer. If inclusion is complicated, press slightly a pedal of an accelerator and release, having added thereby turns of a cranked shaft. It becomes in order that выравнить turns of a cranked shaft with turns of a gear wheel of the corresponding transfer. The subsequent transfers include similarly.
- for gear shifting down clean a foot from a pedal of an accelerator and deduce the gear shifting lever in neutral situation. Carefully increase turns of a cranked shaft, pressing a pedal of an accelerator and at the same time press on the gear shifting lever, including the lowest transfer.