Ford Focus>> Introduction>> Tool



Fig. 11. A set of shlitsevy and crosswise screw-drivers with the corrugated handle



Fig. 12. A set of wrenches dimension from 6 to 19 mm. A set of the combined keys in the sizes 10, 13, 17, 19 of mm



Fig. 13. Candle key. Special face natural rubber insert



Fig. 14. Six-sided keys in the size from 2 to 8 mm



Fig. 15. This tool helps to bend, fix, turn details: 1 — пассатижы; 2 — бокорез; 3 — pincers



Fig. 16. For the details sensitive to blows, apply polymeric or rubber hammers: 1 — a metalwork hammer; 2 — polymeric and rubber hammers



Fig. 17. 1 — a core, with its help openings for drilling plan; 2 — small beards in the size of 3 — 6 mm it is applied at installation and dismantling works on the chassis, the engine and brakes; 3 — a flat chisel with the tempered working edge, with its help you can release the deformed or rusted carving connections



Fig. 18. The tool applied at works with electroconducting and electric equipment: 1 — пассатижи with handles from an insulating material; 2 — opressovochny pincers; 3 — shlitsevy 1, 2, 3 mm and crosswise screw-drivers with handles from an insulating material; 4 — a phase lamp tester



Fig. 19. At work in podkapotny space under the car use a being switched natural a graggers 2 and the corresponding face heads. For works with the closed rooms you will be helped by a box for tools on castors: 1 — a box with the tool; 2 — a key



Good results of repair work can be reached in the presence of the special tool. The bad tool can already not consult with the first rusty bolt, will create to you problems and will spoil mood. Upon purchase of the tool pay attention to quality — the good tool has also the good price, you will not find it in the construction markets or in trading houses. It can be got in specialized shop with a guarantee. With it it will be pleasant to you to work, and it will serve you long and truly ( the Fig. 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 ).