Ford Focus>> Introduction>> Safety — the main thing at repair
Fig. 2. At performance of repair work it is impossible to smoke and use a lighter or matches



Fig. 3. Put on protective earphones at works on metal or the working engine



Fig. 4. Always put on goggles when drilling, grinding and metalwork works



Fig. 5. Working gloves will protect your hands from dirt or grazes at contact with sharp edges



Fig. 6. Pay attention to ventilation of a repair hole. Pairs of gasoline and exhaust gases here can gather. At the working motor it is life-threatening


Fig. 7. When painting big surfaces it is necessary to put on a respirator. Provide thus good ventilation of a room



Fig. 8. Spray, old oil, brake liquid, or old brake shoes utilize as appropriate. The used accumulators accept in special points of reception



Fig. 9. The burned-down safety locks are replaced new the same type or identical on a current



Fig. 10. At any works pay special attention to ignition system. At the working engine the system is under a high voltage — in primary chain tension reaches 30 000 In



At performance of repair work independently special attention give to safety elements. Count the forces, start working, which you really seized. Be not self-confident in metalwork works in which at you was small or at all there was no practical experience. Carelessly carried out repair can lead sooner or later to serious consequences — and, as a rule, not only for you, but also for others ( the Fig. 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 ).