The contents - Ford Focus
 Introduction
 2. Engines
 3. System of greasing of the engine
 4. Cooling system
 5. Power supply system
- 6. Management of the power unit and the fulfilled gases
   - 6.1. EEC-V control unit injection
      6.1.1. Elements of a control system of EEC-V injection
      6.1.2. New components of system of injection with the EEC-V control unit
      6.1.3. The equipment on diagnostics of system of injection of EEC-V
    6.2. Independent work with system of injection can be limited
    6.3. A diesel engine power supply system — a base design
   6.4. A rotor of the sensor of operating impulses and the sensor of an angle of rotation
   6.5. Device of cold start-up
   6.6. Nozzles spray diesel fuel
    6.7. Repair and correction of system of injection of a diesel engine — a case for experts
 7. Ignition system
 8. Coupling
 9. Transmission
 10. Drive of forward wheels
 11. Forward suspension bracket
 12. Back suspension bracket
 13. Steering
 14. Brake system
 15. Electric equipment
 16. System of production of the fulfilled gases
 17. Wheels and tires
 Appendix
 Schemes of electric connections


5f464014


Ford Focus>> Management of the power unit and the fulfilled gases>> EEC-V control unit injection>> The equipment on diagnostics of system of injection of EEC-V
Fig. 201. DLC socket installation site: 1–DLC socket



The diagnostic socket (DLC) 1 (fig. 201) is established in the bottom area of the left rack, behind external facing of a floor. Access to it is possible at removal of a decorative cap.
Fig. 202. CPU processor translator



The processor translator (CPU) translates computer language of the EEC-V control unit on clear for the diagnostic FDS-2000 block language (fig. 202) .