Ford Focus>> Power supply system>> Air filter>> Cleaning of a filtering element
Cleaning of a filtering element carry out in the following order:
- carefully beat out about a firm substrate filtering element. So you remove large particles of a dust;
|
Fig. 194. Blow filtering element from the inside outside. If you noticed damages on a filter surface, replace it
|
- blow the filter the compressed air from the inside outside. So you remove thin particles of a dust
(fig. 194)
;
- never wash out filtering element water. A time of the filter will be hammered finally;
- at installation of a filtering element always pay attention to that condensed surfaces remained pure.
|