The contents - Ford Focus
 Introduction
 2. Engines
 3. System of greasing of the engine
- 4. Cooling system
    Specifications
   4.2. Components of system of cooling
   4.3. Cooling liquid
   4.4. Check of system of cooling on tightness
   4.5. Check of level of cooling liquid
   4.6. Replacement of cooling liquid
   4.7. Assembly and fan dismantling
   4.8. Removal and radiator installation
   4.9. Replacement of hoses of system of cooling
    4.10. The pump of cooling liquid
   - 4.11. Thermostat
      4.11.1. Removal and thermostat installation on Zetec-SE engines
      4.11.2. Removal and thermostat installation on Zetec-E engines
      4.11.3. Removal and thermostat installation on the Endura-DI engine
 5. Power supply system
 6. Management of the power unit and the fulfilled gases
 7. Ignition system
 8. Coupling
 9. Transmission
 10. Drive of forward wheels
 11. Forward suspension bracket
 12. Back suspension bracket
 13. Steering
 14. Brake system
 15. Electric equipment
 16. System of production of the fulfilled gases
 17. Wheels and tires
 Appendix
 Schemes of electric connections


95b376b3


Ford Focus>> Cooling system>> Thermostat>> Removal and thermostat installation on the Endura-DI engine
Removal of the thermostat carry out in the following sequence:
Fig. 179. Casing removal



- remove a casing (fig. 179) ;
- remove a cooler of nadduvochny air as it is described earlier;
- remove a hose;
Fig. 180. Thermostat removal



- remove the thermostat (fig. 180) .
Installation finish in sequence, return to removal. Before installation put a new sealing ring with the silikonosoderzhashchy hermetic put on it.